Wiring diagram - 851.595 - 3-pole On/Off switch with 2-pole overload protection (without low voltage release)
- On / Off switch (0 – 1)
- plug shroud CEE 5-pole with phase inverter
- overload release (ÜLS) in switch with automatic reset
- with transparent PVC cover over ON / OFF buttons
- built-on switch (sealed switch version, for wall or metal plate mounting) beside the motor cable outlet is a second cable outlet with a cable gland M16 x 1,5mm (without cable) and a 5-pole terminal strip as plug-in module with terminal markings (PE, 1, 2, 3, 4)
Technical data
| mains data Ue: | 3 / N / PE, 400V / 50Hz |
| switching capacity AC-1: | 400V / 16A / 11kW |
| switching capacity AC-3: | 400V / 9A / 4kW |
| overload protection: | connector for thermal contact in motor |
| mains outlet: | phase inverter plug CEE 5-pole, 6h, 3P+N+E, 16 A, 400 V (adjustable from the front using a screwdriver) |
| motor cable: |
approx. 1m long, H07RN-F 7G1.5mm² (1 core cut off) 1 litz wire, green and yellow with wire-end claw 130mm long, 5 litz wires, black, blue, brown, red and withe with wire-end claws 95mm long |
| motor cable outlet: | front (looking at plug shroud) – bottom section can be cycled through 90° |
| protection type: | IP 54 (protection from dust deposits and spraying water) |
| switch design: | sealed / mounted switch |
| switch fastening: | 2 bushing boreholes (diagonal) Ø 5.3 mm - 68 x 68 mm |
| material / color: | polypropylene PP / housing black, polyamide PA / plug shroud red |
| dimensions (LxWxH): | approx. 128 x 95 x 141mm including bottom section 33mm |
| weight: | approx. 680 to 760g depending on version |
