Motor starter D 400V – built-on switch

- 3-pole On/Off switch with 2-pole overload protection (without low voltage release)
- On / Off switch (0 – 1)
- plug shroud CEE 5-pole with phase inverter
- overload release (ÜLS) in switch with automatic reset
- with transparent PVC cover over ON / OFF buttons 
- built-on switch (sealed switch version, for wall or metal plate mounting)

 

Technical data

mains data Ue:	3 / N / PE, 400V / 50Hz
switching capacity AC-3:	415V / 10A
overload protection:	10A with automatic reset
mains outlet:	phase inverter plug CEE 5-pole, 6h, 3P+N+E, 16 A, 400 V (adjustable from the front using a screwdriver)
motor cable:	approx. 1m long, H07RN-F 4G1.5mm² 1 litz wire, green and yellow with wire-end claw 130mm long, 3 litz wires, black, brown and gray with wire-end claws 95mm long
motor cable outlet:	front (looking at plug shroud) – bottom section can be cycled through 90°
protection type:	IP 54 (protection from dust deposits and spraying water)
switch design:	sealed / mounted switch
switch fastening:	2 bushing boreholes (diagonal) Ø 5.3 mm - 68 x 68 mm
material / color:	polypropylene PP / housing black, polyamide PA / plug shroud red
dimensions (LxWxH):	approx. 128 x 95 x 141mm including bottom section 33mm
weight:	approx. 680 to 760g depending on version